Bitwig Preset Akai MidiMix LED Utility

!Akai MidiMix LED Handler! with this utility you can get the akai midimix led to work without a controller script. you will get led feedback on the buttons. the buttons "send all" and "solo" have no built-in led so they have no led feedback. - download midipipe http://www.subtlesoft.square7.net/MidiPipe.html - open midipipe configure midipipe: 1. move "MIDI in" from left to right side (double click) 2. set midi in to "MidiPipe Input 1" 3. move "MIDI Out" from left to right side (double click) 4. set midi out to "MidiMix". midipipe will now route receiving midi commandos to akai midimix. Tip 1: save this configuration because it will be lost when rebooting your system. Tip 2: place the saved configuration to auto start of your pc/mac so midipipe will be started on boot with corresponding configuration. configure bitwig: 1. create new instrument channel 2. place the "Akai MidiMix Utility Device" in this channel 3. configure the channel: 3.1 Input: no input 3.2 Output: no output 3.3 open the "Akai MidiMix Utility Device, open the included HW Instrument and set output to "MidiPipe Input 1" 4. open the "MidiMix LED Handler" (Note Grid in the MidiMix Utility) 5. midi map every button on your akai midimix with the corresponding buttons in the MidiMix LED Handler Note Grid